Mercury 75 Service Manual page 75

4 Cylinder Models
c
a - Sta-Strap
b - Stator Harness
c - Switch Box
90-830234R3 DECEMBER 1997
a
b
53970
INSTALLATION
Two styles of stators are currently being used on
1994 through 1996 model 75 - 125 outboards.
These stators can be identified by a large rim or
small rim on the underside of the stator where the
stator harness exits the stator. These stators
MUST BE INSTALLED AS SHOWN RESPECTIVE-
LY OR PREMATURE STATOR FAILURE MAY OC-
CUR AS A RESULT OF STATOR INTERFERANCE
WITH THE ENGINE BLOCK.
Small Rim Stator
c
a
d
e
d
51
Front of Engine
Loctite 222 (92-809818)
51
a - Small Rim
b - Exhaust Cover Bolt
c - High/Low Speed Winding Module of Stator
d - Stator Screws [Apply Loctite 222 to threads] [Torque
screws to 60 lb. in. (6.8 N·m)]
e - Stator Harness
b
d
d
54132
ELECTRICAL - 2A-37