Dr 4 Output Of Calculated Calibration Digits; Calibration Digits 0, 1, 2 (Calculated); Table 8- 2 Assignment Of Data Record 4 - Siemens SIWAREX WP321 Manual

Scale parameters and functions

8.5 DR 4 Output of calculated calibration digits

8.5 DR 4 Output of calculated calibration digits
Date record DR 4 outputs the digits calculated from automatic scale calibration.
This data record cannot be sent to the scale.
Table 8- 2 Assignment of data record 4
Variable Note
Data record num- Contains no. of data
ber record
Length Data record length
information
Application Information about
which application the
DR belongs to
Version identifier Information on the
current data record
version
Calibration digits 0
(calculated): Calibra-
Calibration digits
tion digits calculated
0, 1, 2 (calculated)
in "Automatic Cali-
(Page 58)
bration"
Calibration digits 1
(calculated): Calibra-
tion digits calculated
in "Automatic Cali-
bration"
Calibration digits 2
(calculated): Calibra-
tion digits calculated
in "Automatic Cali-
bration"
Reserve 1 Reserve
Reserve 2 Reserve
Reserve 3 Reserve
8.5.1

Calibration digits 0, 1, 2 (calculated)

The calculation is based on the parameters from DR 3 and DR 10 identified by bold font and
is activated by the command no. 82.
58
Type L
USHORT 2
USHORT 2
USHORT 2
USHORT 2
LONG 4
LONG 4
LONG 4
SHORT 2
USHORT 2
FLOAT 4
Rw Default Min.
r 4 -
r 28 -
r 201 -
r 1 1
r ?
r 0
r 0
r 0 -
r 0 -
r 0 -
Manual, 07/2014, A5E33715669A-02
Max.
-
-
-
65 635
-
-
-
SIWAREX WP321