Getting Started - GeoVision GV-VS01 Manual

1. Open your web browser, and type the default IP address
2. In both Login and Password fields, type the default value admin. Click Apply.
3. In the left menu pane, select Network and then LAN to begin the network settings.
4. According to your network environment, choose one of the methods to set the IP
address:
Dynamic IP Address
Static IP Address
PPPoE
Figure 2-2
Allow automatic IP address assignment. A DHCP server on
the network is required.
Manually specify the GV-Video Server's IP Address, Subnet
Mask, Router/Gateway and DNS Server parameters in the
"Configure connection parameters" section.
Used for xDSL broadband connections. You need to enter
PPPoE username and password from your ISP.

Getting Started

2
http://192.168.0.10
5