GeoVision GV-VS01 Manual page 56

8. Drag and drop the cameras and I/O devices from GV-Video Server onto the imported
E-Map.
9. Close the E-Map Editor. Click Yes when you are promoted to save the changes to
DVR.
For details on creating an E-Map file, see "E-Map Application", Chapter 7, User's Manual
on the Surveillance System Software CD.
Connecting to GV-Video Server through Remote E-Map
Once the E-Map is created at the local GV-System, through the Remote E-Map function,
you can open a web browser anywhere to monitor the videos and I/O devices from the
GV-Video Server.
1. At the local GV-System, click the Network button, select WebCam Server to display
the Sever Setup dialog box, and click OK to start the WebCam function.
2. At the client computer, open the web browser, and type the IP address or domain
name of the local GV-System. The WebCam Compression Selection page appears.
3. Select Emap, and click Submit. A valid user name and password are required to login
the Remote E-Map.
4. On the Remote E-Map window, click the E-Map folder to open it.
5. Click the Login button. This dialog box appears.
54
Figure 5-9