GeoVision GV-VS01 Manual page 52

6. In the Camera List section, select the camera for live view from the Preview drop-
down list, and the camera for recording from the Record drop-down list.
7. Click Apply. The server information should be displayed.
8. Right-click the server list, and select Display Position to map the IP camera to a
camera channel on the GV-System.
9. The Statue column should now display "Connect". Click OK.
Previewing Video and Setting Audio
To preview video and activate audio recoding, right-click the server list (see Figure 5-4)
and select Preview & Audio Setting. This dialog box appears.
[ Preview Channel Select ]
Drop-down List: Select the desired camera for live preview
Preview dual stream record channel: Enable this option for recorded preview.
[ Audio Setting ]
Monitor Sensitivity: Adjust sensitivity of the audio that will be detected. The higher
the value, the more sensitive the system is to the sounding sound.
50
Figure 5-4
Figure 5-5