Alarm Notification; Remote Configuration - GeoVision GV-VS01 Manual

Transparent Degree: Adjusts the transparency level of the panel. Ten levels range
from 10% (fully transparent) to 100% (fully opaque).

Alarm Notification

To have the notification pop-ups in case of the triggered alarms, follow these steps:
1. Click the Show System Menu button (No. 12, Figure 3-2), and select Alarm Notify.
This window appears.
Figure 3-7
Motion Notify: The Viewer pops up as soon as motion is detected.
I/O Alarm Notify: The Viewer pops up as soon as I/O devices are triggered.
Alert Sound: Noises alarm sounds on motion and alarm detection.
Auto SnapShot: A snapshot of live video is taken every 5 seconds on motion and
alarm detection.
File Path: File path is assigned to save the snapshots.

Remote Configuration

To remotely change the video attributes, view the connection status, or update the system
firmware, follow these steps:
Click the Show System Menu button (No. 12, Figure 3-2), and select Remote Config.
The Remote Config dialog box appears. It contains these tabs: (1) Camera, (2) Status and
(3) Firmware Update.
Accessing the GV-Video Server
3
13