Honeywell MCT404 User Manual page 149

6. Troubleshooting
6.3. MC Toolkit application software troubleshooting scenarios
Could not set one or all of the
following parameters:
Conformity, Damping! Do you
want to proceed with the rest
of the download?
Could not set the Scratch Pad!
No device selected! Download
cannot proceed!
No device found! Download
cannot proceed!
Could not read Delta value!
Could not save Online config.
parameters to the file!
The Online config. parameters
are saved to the file!
No Device Types found!
Please make sure that you
have selected the right Config
File
Lower Range Value is greater
than the Upper Range Value!
The Template file name and
the Working file name cannot
be the same, please provide a
different name...
File name already exists. Do
you want to overwrite the
existing file?
File name cannot be blank!
Please provide a file name...
The system resources are
running low. Please close the
MC Toolkit program by
selecting File/Exit menu!
Closing the MC Toolkit
program
Revision 3
When the Write Conformity and Damping command fails,
you get this message. You can abort the rest of the
download or continue
When the Write Scratch Pad command fails, you get this
message.
On the HART device list, you need to select the Device
you want to Download the selected configuration. When
no device is selected, and you select "Download to
Device" button, you get this message
On polling the HART network, if no HART devices are
found, you get this message
The Read Delta value command is sent every time you
select the "SENSOR" button on the HART MAIN MENU
screen before displaying the SENSOR screen. If the
command fails you get this message
In Online mode, you can select "Save to File" to save the
current online parameters to the fi
le. If it fails, you get this message
Same as the message
The file selected may be the wrong one. Also, if you are
in DE mode and you select a file with no Configuration
for the DE devices, then you get this message. Similarly,
if you are in HART mode and you select a file with no
configuration for the HART devices you get this
message.
You cannot set a LRV value greater than URV
You can save the Template file as his working copy. But
the working file name cannot be the same as the
Template file name
You can save the Template file as his working copy. If
the working file name already exists, then you get this
message
You can save the Template file as his working copy. You
need to provide a file name for the working copy
When a program is stale for a long time without any user
inputs, the Pocket PC enters into Hibernation mode.
When it enters this mode and the program captures the
windows message you may see this message and it is
recommended that the program be closed.
When you select the File / Exit menu you get this
message
MC Toolkit (MCT404) User Manual
Same as the
description
Same as the
description
Same as the
description
Same as the
description
Same as the
description
Same as the
description
Same as the
description
Same as the
description
Same as the
description
Same as the
description
Same as the
description
Same as the
description Same
as the description
Informational
Message
137