Connecting Mc Toolkit To A Pc; Connecting Mct404; Types Of Input Methods; Figure 3-6 Virtual Keypad - Honeywell MCT404 User Manual

Mc toolkit
Hide thumbs Also See for MCT404:
Table of Contents

Advertisement

3. Getting Started

3.8. Connecting MC Toolkit to a PC

3.8
Connecting MC Toolkit to a PC

Connecting MCT404

1.
Connect the USB connection cable to a free USB port on the PC.
2.
Insert the MC Toolkit into the docking station.
3.
Follow the Active Sync/Mobile Device Center instructions appearing on the screen to establish the
connection between the MC Toolkit and the PC.
3.9

Types of input methods

The MC Toolkit application allows you to provide inputs through various mechanisms supported through
Windows Mobile platform, they are, Keyboard, Block Recognizer, Letter Recognizer, and Transcriber.
On the other hand the FDC application supports the input through a custom keypad which supports
numeric or alphanumeric keys depending upon the input context.
In the Keyboard method, you select a text field in display, and then selects a character at a time from a virtual
keyboard. Using the keyboard involves familiar concepts that will enable quick and accurate entries.
In the other three methods, the stylus is used to write the desired input directly onto the screen, and each
requires some adaptation of user skills. Of these, the Transcriber is probably the most efficient and easiest to
use.
Character input using keyboard
For character input using keyboard, perform the following steps.
1.
Tap on the arrow
Keyboard.
2.
Use the stylus to provide a character at a time from the virtual keypad as shown in Figure 3-6.
The familiar QWERTY keypad layout enables quick and accurate entries.
Revision 3
at the bottom right corner of the display and tap on a key on the

Figure 3-6 Virtual keypad

MC Toolkit (MCT404) User Manual
23

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents