Honeywell MCT404 User Manual page 163

Mc toolkit
Hide thumbs Also See for MCT404:
Table of Contents

Advertisement

8. Appendix A: Application Notes
8.1. Application Notes
Provisioning Devices
Field device Access Points (FDAP) and
Field Devices (FD) are provisioned before
they can join ISA100 network
How to provision PFDAP/FD:
Launch the Provisioning software in the
PD
Click "Provisioning"
Point the IR port of the PD at the IR port
on the FDAP/FD to be Provisioned
Click on the "Provision a Device" button
on the PD
Security credentials will be transferred to
the FDAP/FD through the IPR port
PD's display a message indicating
whether provisioning was successful
TX Power Setting
Transmitters shipped from the factory will have its Transmitter Power (TX) value set according to its
Model Number and this value is consistent with those values given in Table 7-4.
The TX Power setting may be changed via the Authentication Device when a special application (app) is
installed. This app is considered to be Honeywell sensitive material and is made available only to the
qualified Professional Installer.
Due to radio approval body regulations, changing the TX Power setting is only available if the
professional installer option has been explicitly enabled on your Authentication Device.
Maintenance
The IR Port will show LRV, URV and other configuration information.
Revision 3
WARNING:
The Transmitter must be Professionally Installed in accordance with
the requirements specified in this document. Only the specified
power settings, antenna types and gains and cable lengths
(attenuation) as outlined in this document are valid for Transmitter
installations.
MC Toolkit (MCT404) User Manual
151

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents