Table 10 Tool Bar On Graph/Chart Page - Honeywell MCT404 User Manual

4.6. Online configuration
To view a chart, perform the following steps.
1. On the Device Home page, tap Functions tab.
2. Tap Online > Select.
3. The Device Configuration page appears which displays the top and bottom panes.
4. Navigate to the desired menu. The bottom pane will display items under that menu. Select any
chart from the list of available charts which appear on the bottom pane.
5. Tap View.
The chart page appears.
6. Tap Options > Select Source.
7. The Select Source dialog box appears.
8. Select the required source and tap OK to view the chart of the selected source.
9. Tap Options > View Legends.
10. The View Legends dialog box appears with the legends.
11. Tap Close to close the View Legends dialog box.
12. Tap Return to close the chart page and return to the menu navigation view.
Note: The following options are available on the tool bar of the graph/chart page.
52

Table 10 Tool bar on graph/chart page

Options
Tap to zoom out.
Tap to zoom in.
Tap to change from pan mode to zoom
mode.
Tap to pan.
Tap to pause trending.
Tap to resume the normal mode
MC Toolkit (MCT404) User Manual
Descriptions
Revision 3