Honeywell MCT404 User Manual page 156

8.1. Application Notes
If you do not see the Screen Y, select Start\All Programs\Microsoft ActiveSync/Mobile Device Center.
It is likely that your PDA is not synched up with your PC and you will see the screen below.
Select File/Connection Settings and set the Connection settings as below. Select OK.
The Synch process should start now. If you are still not connected, then Soft Reset the PDA with the
Sync cable still connected between the PDA base and the PC.
This should automatically establish synch connection between the PDA and the PC and you should see
the Screen Y
144 MC Toolkit (MCT404) User Manual Revision 3