Template File; Figure 5-12 Honeywell De Save Template Screen; Figure 5-13 Offline Honeywell De Save Template As Working File - Honeywell MCT404 User Manual

5.7. Offline Configuration

Template File

MC Toolkit will be shipped with a template file named TEMPLMCT.XML" with some default
configurations. The user cannot modify it.
If the user selects this file for loading and editing parameters, he gets the message shown in Figure 5-12
Honeywell DE Save Template Screen.
The user can select "Yes" to save the Template file as the working copy by giving a new name other than
TEMPLMCT.XML in the screen below

Figure 5-13 Offline Honeywell DE Save Template as working file

In the Working File Name field, enter a file name other than TEMPLMCT.XML without any extensions,
and then select OK. The newly named file now will be the Working file.
If you select Cancel, you will go back to the FILE MANAGEMENT dialog without any changes.
106

Figure 5-12 Honeywell DE Save Template Screen

MC Toolkit (MCT404) User Manual Revision 3