Honeywell MCT404 User Manual page 46

4.3. Customizing the settings
4. If you want to load devices with a generic DD files even if a DD matching the device revision is
available, select the checkbox under the Always Use Generic option.
Modifying other default settings
Using the "Others" tab under settings, you can set the following:

Threshold percentage for notifying a low storage space warning. By default, the notification for
percentage of available storage card space is set as 5%. Note that you cannot reduce the percentage
beyond 50%.

Enable or disable logging option for generating application diagnostic log files.
To modify the settings for low storage warning, perform the following steps.
1. On the FDC homepage, tap Settings > Select
The Settings dialog box appears.
2. Tap Others tab.
3. Select Low Storage Space Warning checkbox.
4. Press and hold the up or down arrow keys to set the notification for percentage of available storage
card space, which is available.
For example, if you want to set the percentage for notifying a low storage card space to 20%, press
and hold the up or down arrow keys until the required percentage appears.
To modify the settings for saving log files, perform the following steps.
1. On the FDC homepage, tap Settings > Select
The Settings dialog box appears.
2. Tap Others tab.
3. Select Enable or Disable under the Application Diagnostics option.
Once you are done with the desired changes in Settings, tap "Save" on the menu bar. The modified
settings are then updated successfully in the application. Tap "Return" to return to the FDC home page.
34 MC Toolkit (MCT404) User Manual Revision 3