Procedural Considerations; Table 12 De Upload Procedures - Honeywell MCT404 User Manual

5. Managing DE Devices using MC Toolkit Software
5.5. Online configuration

Procedural Considerations

De device Upload, Configuration and Calibration procedures are listed in the tables below.
Note:
This Warning appears only
if the transmitter is
configured for operation in
analog mode.
WARNING!
Before proceeding, if the
transmitter is part of a
control loop, ensure that
interlocks and alarms are
secured and that the loop is
in Manual control.
Then, select the OK button in
the popup message. The
display at right appears.
Revision 3

Table 12 DE Upload Procedures

DE Upload Procedures
Select the Online button
This Warning message
appears.
Use this display to
- Verify device identification
and to monitor Gross
Status process conditions
-
Select the desired Units
for the Process Variable
input using the PV Units
drop-down list.
MC Toolkit (MCT404) User Manual
If the MC Toolkit is
connected to a DE Device,
select the button.
OK
Select the Upload button; the
wait cursor and progress bar
appear.
Then, the Main Menu for the
Transmitter appears.
75