Replacement Modules - GE UR F35 Series Instruction Manual

2.1 INTRODUCTION
The order codes for the reduced size vertical mount units with the process bus module are shown below.
Table 2–6: F35 ORDER CODES (REDUCED SIZE VERTICAL UNITS WITH PROCESS BUS)
F35 - * ** - *
BASE UNIT F35 | |
CPU E |
G |
H |
J |
K |
L |
2
M |
N |
P |
R |
SOFTWARE 00
01
03
04
MOUNT/COATING
FACEPLATE/ DISPLAY
POWER SUPPLY
CT/VT MODULES
DIGITAL INPUTS/OUTPUTS
INTER-RELAY
COMMUNICATIONS
(select a maximum of 1 per unit)
For the last module, slot P is used for digital and transducer
input/output modules; slot R is used for inter-relay
communications modules.
Replacement modules can be ordered separately as shown below. When ordering a replacement CPU module or face-
plate, please provide the serial number of your existing unit.
Not all replacement modules may be applicable to the F35 relay. Only the modules specified in the order codes are
available as replacement modules.
NOTE
Replacement module codes are subject to change without notice. Refer to the GE Multilin ordering page at
http://www.gedigitalenergy.com/multilin/order.htm
NOTE
2-6
* * - F ** - H ** - M ** - P/R
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
V | | | | |
B | | | | |
C | | | |
D | | | |
R | | | |
A | | | |
K | | | |
M | | | |
Q | | | |
U | | | |
L | | | |
N | | | |
T | | | |
V | | | |
H | | |
L | | |
| 81 |
XX XX
F35 Multiple Feeder Protection System
** Reduced Size Vertical Mount (see note regarding P/R slot below)
| Base Unit
| RS485 and RS485
| RS485 and multi-mode ST 10Base-F
| RS485 and multi-mode ST redundant 10Base-F
| RS485 and multi-mode ST 100Base-FX
| RS485 and multi-mode ST redundant 100Base-FX
| RS485 and single mode SC 100Base-FX
| RS485 and single mode SC redundant 100Base-FX
| RS485 and 10/100Base-T
| RS485 and single mode ST 100Base-FX
| RS485 and single mode ST redundant 100Base-FX
| No Software Options
| Ethernet Global Data (EGD); not available for Type E CPUs
| IEC 61850; not available for Type E CPUs
| Ethernet Global Data (EGD) and IEC 61850; not available for Type E CPUs
| Vertical (3/4 rack)
| Vertical (3/4 rack) with harsh environmental coating
| English display
| French display
| Russian display
| Chinese display
| Enhanced front panel with English display
| Enhanced front panel with French display
| Enhanced front panel with Russian display
| Enhanced front panel with Chinese display
| Enhanced front panel with English display and user-programmable pushbuttons
| Enhanced front panel with French display and user-programmable pushbuttons
| Enhanced front panel with Russian display and user-programmable pushbuttons
| Enhanced front panel with Chinese display and user-programmable pushbuttons
| 125 / 250 V AC/DC power supply
| 24 to 48 V (DC only) power supply
| Eight-port digital process bus module
XX No Module
4A 4 Solid-State (no monitoring) MOSFET outputs
4B 4 Solid-State (voltage with optional current) MOSFET outputs
4C 4 Solid-State (current with optional voltage) MOSFET outputs
4D 16 digital inputs with Auto-Burnishing
4L 14 Form-A (no monitoring) Latching outputs
67 8 Form-A (no monitoring) outputs
6A 2 Form-A (voltage with optional current) and 2 Form-C outputs, 8 digital inputs
6B 2 Form-A (voltage with optional current) and 4 Form-C outputs, 4 digital inputs
6C 8 Form-C outputs
6D 16 digital inputs
6E 4 Form-C outputs, 8 digital inputs
6F 8 Fast Form-C outputs
6G 4 Form-A (voltage with optional current) outputs, 8 digital inputs
6H 6 Form-A (voltage with optional current) outputs, 4 digital inputs
6K 4 Form-C and 4 Fast Form-C outputs
6L 2 Form-A (current with optional voltage) and 2 Form-C outputs, 8 digital inputs
6M 2 Form-A (current with optional voltage) and 4 Form-C outputs, 4 digital inputs
6N 4 Form-A (current with optional voltage) outputs, 8 digital inputs
6P 6 Form-A (current with optional voltage) outputs, 4 digital inputs
6R 2 Form-A (no monitoring) and 2 Form-C outputs, 8 digital inputs
6S 2 Form-A (no monitoring) and 4 Form-C outputs, 4 digital inputs
6T 4 Form-A (no monitoring) outputs, 8 digital inputs
6U 6 Form-A (no monitoring) outputs, 4 digital inputs
6V 2 Form-A outputs, 1 Form-C output, 2 Form-A (no monitoring) latching outputs, 8 digital inputs
2A C37.94SM, 1300nm single-mode, ELED, 1 channel single-mode
2B C37.94SM, 1300nm single-mode, ELED, 2 channel single-mode
2E Bi-phase, single channel
2F Bi-phase, dual channel
2G IEEE C37.94, 820 nm, 128 kbps, multimode, LED, 1 Channel
2H IEEE C37.94, 820 nm, 128 kbps, multimode, LED, 2 Channels
72 1550 nm, single-mode, LASER, 1 Channel
73 1550 nm, single-mode, LASER, 2 Channel
74 Channel 1 - RS422; Channel 2 - 1550 nm, single-mode, LASER
75 Channel 1 - G.703; Channel 2 - 1550 nm, Single-mode LASER
76 IEEE C37.94, 820 nm, 64 kbps, multimode, LED, 1 Channel
77 IEEE C37.94, 820 nm, 64 kbps, multimode, LED, 2 Channels
7A 820 nm, multi-mode, LED, 1 Channel
7B 1300 nm, multi-mode, LED, 1 Channel
7C 1300 nm, single-mode, ELED, 1 Channel
7D 1300 nm, single-mode, LASER, 1 Channel
7E Channel 1 - G.703; Channel 2 - 820 nm, multi-mode
7F Channel 1 - G.703; Channel 2 - 1300 nm, multi-mode
7G Channel 1 - G.703; Channel 2 - 1300 nm, single-mode ELED
7H 820 nm, multi-mode, LED, 2 Channels
7I 1300 nm, multi-mode, LED, 2 Channels
7J 1300 nm, single-mode, ELED, 2 Channels
7K 1300 nm, single-mode, LASER, 2 Channels
7L Channel 1 - RS422; Channel 2 - 820 nm, multi-mode, LED
7M Channel 1 - RS422; Channel 2 - 1300 nm, multi-mode, LED
7N Channel 1 - RS422; Channel 2 - 1300 nm, single-mode, ELED
7P Channel 1 - RS422; Channel 2 - 1300 nm, single-mode, LASER
7Q Channel 1 - G.703; Channel 2 - 1300 nm, single-mode LASER
7R G.703, 1 Channel
7S G.703, 2 Channels
7T RS422, 1 Channel
7W RS422, 2 Channels
for the latest details concerning F35 ordering options.
2 PRODUCT DESCRIPTION

2.1.3 REPLACEMENT MODULES

GE Multilin
http://