GE UR F35 Series Instruction Manual page 3

Addendum
This addendum contains information that relates to the F35 Multiple Feeder Protection System, version 5.7x. It outlines
items that appear in the instruction manual GEK-113520C (revision U4) that are not included in the current F35 opera-
tions.
The following functions and items are not yet available with the current version of the F35 relay:
• N/A.
Version 4.0x and higher releases of the F35 relay includes new hardware (CPU and CT/VT modules).
• The new CPU modules are specified with the following order codes: 9E, 9G, 9H, 9J, 9K, 9L, 9M, 9N, 9P, 9R, and 9S.
• The new CT/VT modules are specified with the following order codes: 8F, 8G, 8H, 8J 8L, 8M, 8N, 8R.
The following table maps the relationship between the old CPU and CT/VT modules to the newer versions:
MODULE OLD
CPU 9A
9C
9D
---
---
---
---
---
---
---
---
CT/VT 8A
8B
8C
8D
--
--
--
--
The new CT/VT modules can only be used with the new CPUs (9E, 9G, 9H, 9J, 9K, 9L, 9M, 9N, 9P, 9R, and 9S), and
the old CT/VT modules can only be used with the old CPU modules (9A, 9C, 9D). To prevent any hardware mis-
matches, the new CPU and CT/VT modules have blue labels and a warning sticker stating "Attn.: Ensure CPU and
DSP module label colors are the same!". In the event of mismatch between the CPU and CT/VT module, the relay
does not function and a
All other input/output modules are compatible with the new hardware.
With respect to the firmware, firmware versions 4.0x and higher are only compatible with the new CPU and CT/VT mod-
ules. Previous versions of the firmware (3.4x and earlier) are only compatible with the older CPU and CT/VT modules.
ADDENDUM
NEW
9E
9G
9H
9J
9K
9L
9M
9N
9P
9R
9S
8F
8G
8H
8J
8L
8M
8N
8R
or
DSP ERROR HARDWARE MISMATCH
DESCRIPTION
RS485 and RS485 (Modbus RTU, DNP)
RS485 and 10Base-F (Ethernet, Modbus TCP/IP, DNP)
RS485 and redundant 10Base-F (Ethernet, Modbus TCP/IP, DNP)
RS485 and multi-mode ST 100Base-FX
RS485 and multi-mode ST redundant 100Base-FX
RS485 and single mode SC 100Base-FX
RS485 and single mode SC redundant 100Base-FX
RS485 and 10/100Base-T
RS485 and single mode ST 100Base-FX
RS485 and single mode ST redundant 100Base-FX
RS485 and six-port managed Ethernet switch
Standard 4CT/4VT
Sensitive ground 4CT/4VT
Standard 8CT
Sensitive ground 8CT
Standard 4CT/4VT with enhanced diagnostics
Sensitive ground 4CT/4VT with enhanced diagnostics
Standard 8CT with enhanced diagnostics
Sensitive ground 8CT with enhanced diagnostics
error displays.