GE UR F35 Series Instruction Manual page 327

6 ACTUAL VALUES
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
The metered values for real, reactive, and apparent power, as well as power factor, are displayed in this menu. The "SRC
1" text will be replaced by whatever name was programmed by the user for the associated source (see

TEM SETUP SIGNAL SOURCES
g) ENERGY METERING

PATH: ACTUAL VALUES METERING
 ENERGY
 SRC 1
MESSAGE
MESSAGE
MESSAGE
The metered values for real and reactive energy are displayed in this menu. The "SRC 1" text will be replaced by whatever
name was programmed by the user for the associated source (see
Because energy values are accumulated, these values should be recorded and then reset immediately prior to changing
CT or VT characteristics.
h) DEMAND METERING

PATH: ACTUAL VALUES METERING
 DEMAND
 SRC 1
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
GE Multilin
SRC 1 APPARENT PWR
φb:
0.000 VA
SRC 1 APPARENT PWR
φc:
0.000 VA
SRC 1 POWER FACTOR
3φ: 1.000
SRC 1 POWER FACTOR
φa:
1.000
SRC 1 POWER FACTOR
φb:
1.000
SRC 1 POWER FACTOR
φc:
1.000
).
 
SOURCE SRC 1 ENERGY
SRC 1 POS WATTHOUR:
0.000 Wh
SRC 1 NEG WATTHOUR:
0.000 Wh
SRC 1 POS VARHOUR:
0.000 varh
SRC 1 NEG VARHOUR:
0.000 varh
 
SOURCE SRC 1 DEMAND
SRC 1 DMD IA:
0.000 A
SRC 1 DMD IA MAX:
0.000 A
SRC 1 DMD IA DATE:
2001/07/31 16:30:07
SRC 1 DMD IB:
0.000 A
SRC 1 DMD IB MAX:
0.000 A
SRC 1 DMD IB DATE:
2001/07/31 16:30:07
F35 Multiple Feeder Protection System

SETTINGS SYSTEM SETUP
6.3 METERING

SETTINGS SYS-
6
 ).
SIGNAL SOURCES
6-17