Ethernet; Direct Inputs - GE UR F35 Series Instruction Manual

6 ACTUAL VALUES
There are 256 FlexState bits available. The second line value indicates the state of the given FlexState bit.

PATH: ACTUAL VALUES STATUS
 ETHERNET

MESSAGE
These values indicate the status of the primary and secondary Ethernet links.

PATH: ACTUAL VALUES STATUS
 DIRECT INPUTS

MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
The
AVERAGE MSG RETURN TIME
ring configuration (this value is not applicable for non-ring configurations). This is a rolling average calculated for the last
ten messages. There are two return times for dual-channel communications modules.
The
UNRETURNED MSG COUNT
make the trip around the communications ring. The
direct output messages that have been received but fail the CRC check. High values for either of these counts may indicate
on a problem with wiring, the communication channel, or one or more relays. The
values can be cleared using the
COUNT
The to
DIRECT INPUT 1 DIRECT INPUT (32)
GE Multilin


ETHERNET

ETHERNET PRI LINK
STATUS: OK
ETHERNET SEC LINK
STATUS: OK


DIRECT INPUTS

AVG MSG RETURN
TIME CH1: 0 ms
UNRETURNED MSG
COUNT CH1: 0
CRC FAIL COUNT
CH1: 0
AVG MSG RETURN
TIME CH2: 0 ms
UNRETURNED MSG
COUNT CH2: 0
CRC FAIL COUNT
CH2: 0
DIRECT INPUT 1:
On
DIRECT INPUT 2:
On
↓
DIRECT INPUT 32:
On
is the time taken for direct output messages to return to the sender in a direct input/output
values (one per communications channel) count the direct output messages that do not
CRC FAIL COUNT
CLEAR DIRECT I/O COUNTERS
values represent the state of each direct input.
F35 Multiple Feeder Protection System
Range: Fail, OK
Range: Fail, OK
values (one per communications channel) count the
UNRETURNED MSG COUNT
command.
6.2 STATUS
6.2.13 ETHERNET
6.2.14 DIRECT INPUTS
6
and
CRC FAIL
6-7