GE UR F35 Series Instruction Manual page 277

5 SETTINGS
This feature allows switching between two input arguments defined by 8 bits each. The bits are specified by FlexLogic™
operands. The feature could be viewed as an integrated two-position switch for 8 logic signals.
Typically this element is applied in conjunction with the Digitizer and 8-bit Comparator features.
The switch runs every half power cycle (every four protection passes).
• 8BIT SW 1 ARG A0 to 8BIT SW 1 ARG A7: These settings specify FlexLogic™ operands that constitute the first (A)
input of the switch. These operands are routed to the output operands if the control input is in the "Off" position.
• BIT SW 1 ARG B0 to 8BIT SW 1 ARG B7: These settings specify FlexLogic™ operands that constitute the second (B)
input of the switch. These operands are routed to the output operands if the control input is in the "On" position.
• 8BIT SW 1 CONTROL: This setting specifies FlexLogic™ operands to control the routing between the A and B inputs
of the switch. If the control operand is in the "Off" state, the first (A) input is switched to the output. If the control oper-
and is in the "On" state, the second (B) input is switched to the output. The switching takes place instantaneously.
GE Multilin
ETT NG
8BIT SWITCH 1
FUNCTION:
Enabled = 1 RUN
ETT NG
8BIT SW 1 ARG A0:
Off = 0
8BIT SW 1 ARG B0:
Off = 0
8BIT SW 1 ARG A1:
Off = 0
8BIT SW 1 ARG B1:
Off = 0
8BIT SW 1 ARG A2:
Off = 0
8BIT SW 1 ARG B2:
Off = 0
8BIT SW 1 ARG A3:
Off = 0
8BIT SW 1 ARG B3:
Off = 0
8BIT SW 1 ARG A4:
Off = 0
8BIT SW 1 ARG B4:
Off = 0
8BIT SW 1 ARG A5:
Off = 0
8BIT SW 1 ARG B5:
Off = 0
8BIT SW 1 ARG A6:
Off = 0
8BIT SW 1 ARG B6:
Off = 0
8BIT SW 1 ARG A7:
Off
Off = 0
8BIT SW 1 ARG B7:
On
Off = 0
ETT NG
8BIT SW 1 CONTROL:
Off = 0
Figure 5–74: 8-BIT SWITCH LOGIC
F35 Multiple Feeder Protection System
5.7 CONTROL ELEMENTS
FLEXLOG C OPE AND
8BIT SWITCH 1 BIT 0
FLEXLOG C OPE AND
8BIT SWITCH 1 BIT 1
FLEXLOG C OPE AND
8BIT SWITCH 1 BIT 2
FLEXLOG C OPE AND
8BIT SWITCH 1 BIT 3
FLEXLOG C OPE AND
8BIT SWITCH 1 BIT 4
FLEXLOG C OPE AND
8BIT SWITCH 1 BIT 5
FLEXLOG C OPE AND
8BIT SWITCH 1 BIT 6
FLEXLOG C OPE AND
8BIT SWITCH 1 BIT 7
842017A1.CDR
5
5-147