Information - Riso 9630 Troubleshooting Manual

<I000-0000>Information
These messages are displayed when machine maintenance is required.
Message
The drain tank must be replaced
soon. Contact your dealer, and
have a new drain tank ready.
The transfer belt is dirty. Leaving
the belt dirty results in
inaccurate printing. Contact your
dealer.
Parts of the Face Down Finisher
need to be replaced. Contact
your dealer.
The ink cartridge is near
expiration. Use or replace the ink
cartridge soon.
Action to Take
The drain tank needs to be replaced. Contact your dealer or authorized
service representative.
• Printing cannot be performed when the drain tank is full. Call for
service immediately when this message is displayed.
The transfer belt needs to be cleaned. Contact your dealer or authorized
service representative.
• The paper size and position cannot be detected when the
transfer belt is dirty, resulting in improper printing.
The cleaning operation needs to be performed by technical
support staff. Call for service immediately when this message is
displayed.
Until the transfer belt is cleaned, the margins around the edges
of the paper are 5 mm (7/32"), regardless of the printable area
setting.
Contact your dealer or authorized service representative. If you touch
[Close], you can continue using the machine functions except for the face
down finisher. Printing can be performed using a different stacking tray.
For optimal printing quality, use the ink cartridge within 24 months from
the date of manufacture (when preserved under room temperature).
ComColor GD Series Troubleshooting Guide
1
1-11