6
Pull out the tape from the staple
case.
7
Close the staple cartridge cover.
8
Return the staple cartridge to its
original position.
9
Close the cover.
3-2
Replacing the Staple Cartridge UR2/UR3
• The staple replacement message may appear
even if there are staples remaining. Even so,
replace the staple case anyway. The remaining
staples cannot be used. Please take note of
this.
1
Open the cover.
2
Pull out the unit by pulling forward
while pushing the R2/R3 lever to the
right.
3
Hold the latches on the left and right
sides of the cartridge and pull up
towards the left.
ComColor GD Series Troubleshooting Guide