Troubleshooting - Icom iC-M605 Instruction Manual

PROBLEM
Sensitivity is too low, • The antenna is defective or the coaxial
and only strong signals cable connector is shorted or cut.
can be heard.
Communication cannot • The antenna is defective or the coaxial
be established. cable connector is shorted or cut.
The transceiver is • A software error has occured.
locked up, and does
not respond.
The transceiver does • The transceiver's Phase Lock Loop is
not work. unlocked.
POSSIBLE CAUSE

TROUBLESHOOTING

SOLUTION
• Repair the problem and then reconnect
to the antenna connector.
• Repair the problem and then reconnect
to the antenna connector.
• Turn OFF the transceiver, and then turn
it ON again.
• Contact your dealer.
14
1
REF.
2
p. 92
3
4
p. 92
5
—
6
7
—
8
9
10
11
12
13
14
15
16
105