Icom iC-M605 Instruction Manual page 54

8
DSC OPERATION
■ Sending a Non-Distress call (Continued)
8. When the acknowledgement is
received:
• Alarm sounds.
• The following screen is displayed.
9. Push any [Alarm Off]
10. Push any [Close Call RCVD
Window] .
• Enters the DSC Task mode.
11. Rotate [CH/ENT] to view the
received message log.
12. Push [Standby]
the Main screen.
44
D Sending a Test call acknowledgement
When a Test call is received, you can
send an acknowledgement.
1. When a Test call is received:
• Alarm sounds.
2. Push any [Alarm Off]
3. Push [Accept]
.
• Enters the DSC Task mode.
to return to
4. Push [ACK]
.
.
• The call contents screen is displayed.
L Rotate [CH/ENT] to view the call
contents.
5. Push [Call]
acknowledgement.
6. Push [Standby]
the Main screen.
TIP: When "Test ACK" is set to "Auto,"
the transceiver automatically sends
the acknowledgement. (p. 58)
.
Push
to send the
to return to