Entering The Atis Code (For Dutch And German Versions); Preparation - Icom iC-M605 Instruction Manual

3

PREPARATION

■ Entering the ATIS code (For Dutch and German versions)

The Automatic Transmitter Identification
System (ATIS) ID consists of 10 digits.
You can enter the ID in the "ATIS ID
Input" item on the Menu screen.
You can enter this ID ONLY ONCE.
After entry, only your dealer or
distributor can change it.
If your ATIS ID has already been
entered, this entry is not necessary.
1. Push [MENU].
2. Select "ATIS ID Input," then push
[ENT].
3. Enter a 10 digit ATIS code.
10
4. After entering the 10th digit, push
[Finish] to set the ID.
5. Reenter your ATIS code to confirm.
Push
+
Rotate
6. After entering the 10th digit, push
[Finish]
Push
• When you successfully enter your
ATIS code, the following screen is
Push
displayed.
+
Rotate
to register the ID.
Push