Dsc Operation - Icom iC-M605 Instruction Manual

8

DSC OPERATION

■ Making an Individual call using an AIS transponder (Continued)
4. After making the Individual DSC call, the transponder
will display "DSC Transmission COMPLETED."
• Push [CLEAR] to return to the screen displayed before you
entered the Voice channel selection screen in step 2.
• The transceiver stands by on Channel 70 until an
acknowledgement is received.
5. When the acknowledgement is received, alarm sounds.
z If the acknowledgement 'Able to comply' is received,
push [ALARM OFF]
select the Intership channel specified in step 2.
• A different Intership channel will be selected if the station
you called cannot use the channel.
• To reply, push [PTT] and speak at a normal voice level.
• You can check the MMSI code or the name, if entered, of
the AIS target on the display.
z If the acknowledgement 'Unable to comply' is
received, push [ALARM OFF]
then "INDIVIDUAL CALL FAILED" is displayed.
64
to stop the alarm, and then
to stop the alarm,
6. After the communication is finished, push [Standby]
to return to the normal operating mode.
TRANSPONDER
[Y]
[Z]
[CLEAR]
[DSC]