Answering Calls - Yealink T41P Skype User Manual

Pick up the handset to place a call using the handset mode.
-
- With the optional headset connected, press
then press
The # key is configured as a send key by default. You can also set the * key as the send key, or
set neither. For more information, refer to
To place multiple calls:
You can have more than one call on your T41P Skype for Business phone. To place a new call
during an active call, do the following:
Press the line key. The active call is placed on hold.
-
Enter the desired number using the keypad.
Press
Press the Hold soft key to place the original call on hold.
-
Press the NewCall soft key.
Enter the desired number using the keypad.
Press
You can press
retrieve the desired call.

Answering Calls

When you are not in another call, you can answer a call in three ways:
Using the handset

Using the speakerphone

Using the headset

Note You can ignore incoming calls by pressing the Reject soft key or the Silence soft key or press the
key. You can also change the presence status to be Do Not Disturb, and then the phone will
ignore all incoming calls to your phone. For more information, refer to
on page 23.
You can forward incoming calls to someone else by pressing the FWD soft key, or to voice mail
by pressing the FWD VM soft key. For more information, refer to
Answering When Not In Another Call
Call duration and destination will always appear on the LCD screen of the active call.
, or the Call soft key to place a call using the headset mode.
, , or the Call soft key.
, , or the Call soft key.
or to switch between calls, and then press the Resume soft key to
to activate the headset mode, and
Key as Send on page 36.
Call Forward
Basic Call Feature
Changing Presence Status
on page 92.
77