Using Multicast Paging; Branch Office Resiliency - Yealink T41P Skype User Manual

Using Multicast Paging

To send RTP stream via the paging list:
Do one of the following to enter the paging list.
1.
When the phone is idle, press the second line key (indicating the paging list key) or
-
press Menu->Features->Paging List.
- During a call, press the second line key (indicating the paging list key).
During a call, press Hold->NewCall, and then press the second line key (indicating
-
the paging list key).
Press
2.
Press
3.
Both the sender's and receiver's phones play a warning tone and the receiver automatically
answers the multicast RTP session in the speakerphone mode.
The following figure shows a multicast RTP session on the phone:
To place the current multicast RTP session on hold, press the Hold soft key.
4.
The sender's phone places the multicast RTP session on hold and receiver's phone releases
the session.
To resume the held multicast RTP session, press the Resume soft key.
5.
The multicast RTP session is established again.
To end the multicast RTP session, press the EndCall soft key.
6.
Note
Multicast RTP is one way only from the sender to the multicast address(es) (receiver). For
outgoing RTP multicasts, all other existing calls on the phone will be placed on hold.

Branch Office Resiliency

If you sign into the phone using Onprem account, you can use branch office resiliency feature.
Current Online environment does not support this feature.
Branch office resiliency is critical for multi-site deployments of Skype for Business where the
or to select the desired group.
or the Paging soft key to send RTP.
Basic Call Feature
135