Camshaft - Perkins 2800 Workshop Manual

2800

Camshaft

To remove and to fit
Special requirements
Special tools
Description
Engine turning tool
Guide stud
Cradle tool
Camshaft guide
Pilot
Lifting hooks
Alignment sleeve
To remove
1 Remove the radiator, Operation 12-4.
2 Remove the fan, Operation 12-5.
3 Remove the gear case cover, Operation 6-1.
4 Remove the rocker cover, Operation 3-1.
5 Remove the rocker lever and shaft assemblies, Operation 3-2.
6 Remove the top bolt (A1), the timing bolt, from the cover (A2) on the flywheel housing and slacken the other
cover bolt to allow the cover to open.
7 Remove the plug (A3) from the timing bolt location in the flywheel housing and fit the timing bolt.
Note: There are two locations for the timing bolt, one at each side of the flywheel housing. Use the location
which is the most convenient.
Workshop Manual, TSD3450E, Issue 1
Part number
CH11148 Thread lock compound (10 ml)
GE50019
GE50018
GE50017
GE50015
GE50025
GE50016
Operation 3-10
Consumable products
Description
3
Part number
21820 117
Continued
45