Inserting The Portafilter; Preset Shot Volume; Re-Programming Shot Volume - Sage Barista Express BES870 Instruction Book

Inserting the Portafilter

Place the portafilter underneath the group head
so that the handle is aligned with the INSERT
position. Insert the portafilter into the group
head and rotate the handle towards the centre
until resistance is felt.
INSERT
Preset Shot Volume - 1 CUP button
Press the 1 CUP button once to extract a single
shot of espresso at the preset volume (approx.
30ml). The extraction will start using the
low pressure pre-infusion (see page 16).
The machine will stop after the preset volume
has been extracted.
PROGRAM
NOTE
The amount of espresso extracted in the cup
will vary depending on your grind size and
grind amount settings.
Pressing the 1 CUP or 2 CUP button during
a preset shot volume will immediately stop
the extraction.
LOCK
Preset Shot Volume - 2 CUP button
Press the 2 CUP button once to extract a
double shot of espresso at the preset volume
(approx. 60ml). The extraction will start using
the low pressure pre-infusion The machine
will stop after the preset volume has
been extracted.
PROGRAM
Re-Programming Shot Volume - 1 CUP Button
1. To begin programming, press the
Programme me button once. The machine
will beep once and the Programme button
will begin to flash. This indicates the
machine is in programming mode.
2. Press 1 CUP button to start espresso
extraction. Press 1 CUP button again
once desired volume of espresso has been
extracted. The machine will beep twice
to indicate the new 1 CUP volume has
been set.

Re-Programming Shot Volume

- 2 CUP Button
1. To begin programming, press the
Programme button once. The machine will
beep once and the Programme button will
begin to flash. This indicates the machine is
in programming mode.
2. Press 2 CUP button to start espresso
extraction. Press 2 CUP button again
once desired volume of espresso has been
extracted. The machine will beep twice
to indicate the new 2 CUP volume has
been set.
15