Emerson Micro Motion 5700 Installation Manual page 46

Power supply wiring
Prerequisites
Obtain an S-coded M12-terminated cable.
Procedure
1.
2.
42
Attach the M12-terminated cable to the power connector on the Model 5700
transmitter. See Figure 4-2.
Attach the other cable end using the pinouts described in
Figure 4-2: M12-terminated cable to power supply
Table 4-1: M12 power supply pinouts
Pin identification
Pin 1
Pin 2
Pin 3
Ground
Outputs
+ / L / L1
- / N / L2
Not used
Ring terminal (C)
Micro Motion ® Model 5700 Ethernet transmitters
Table 4-1.