Emerson Micro Motion 5700 Installation Manual page 18

Ethernet transmitter

Hide thumbs Also See for Micro Motion 5700:

Table of Contents

Mounting and sensor wiring

Figure 2-6:

Sensor wiring feedthrough

Feed the sensor wiring cable into the transmitter wiring compartment.

Connect the sensor wires to the appropriate terminals.

Note

Terminate the 4-wire cable drain wires only at the sensor/core processor end of the cable. See

the sensor installation manual for more detail. Do not connect the 4-wire cable drain wires to

the ground screw located inside the 5700 junction box.

•

See

Figure 2-7

for 4-wire terminal connections.

•

See

Figure 2-8

for 9-wire terminal connections.

Micro Motion

Model 5700 Ethernet transmitters

Table of Contents