Prerequisites
Important
Meter installation and wiring should be performed only by suitably-trained personnel using the
appropriate government and corporate safety standards.
Procedure
Wire to the appropriate output terminal and pins.
Figure 3-1:
A
A. mA Output
B. Channel C
C. 820 Ω maximum loop resistance
D. Signal device
Figure 3-2:
A
A. mA Output
B. Channel C
C. 5–30 VDC (maximum)
D. See
E. Signal device
Installation Manual
Internally-powered mA Output wiring
B
Externally-powered mA Output wiring
B
Figure 3-3
Wiring the channels
C
D
C
D
E
29