Emerson Micro Motion 5700 Installation Manual page 13

•
Procedure
1.
Figure 2-1: Mounting bracket to transmitter
2.
Installation Manual
If you are mounting the transmitter to an instrument pole:
- Ensure that the instrument pole extends at least 12 inches (305 mm) from a rigid
base, and is no more than 2 inches (50.8 mm) in diameter.
- Confirm that you have the necessary tools, and the instrument-pole mounting
kit shipped with the transmitter.
Attach the mounting bracket to the transmitter and tighten the screws to 80-90 in-
lbs.
Using a wall-mount or pole-mount:
• For wall-mount installations, secure the mounting bracket to the prepared
surface.
Mounting and sensor wiring
9