Daisy chain and ring topologies
1.
2.
3.
4.
Installation Manual
Feed two RJ45 cables through the conduits on the Model 5700 transmitter.
Since two cables will not fit into one conduit, you will need to use separate conduits
for each cable.
Connect the external switch or previous transmitter to Channel A or Channel B.
Functionality is identical for both Channel A and Channel B as the Model 5700
transmitter contains an internal Ethernet switch.
Connect the next transmitter in the network to the unused channel.
Anchor the cables to the module backplate using cable ties.
Example:
Wiring the channels
37