SMC100CC & SMC100PP
EDH0206En2042 – 04/16
2.7
Connector Identification
2.7.1
Front side
KEYPAD
RS-232-C
RS-485 IN
RS-485 OUT
CONFIG.
LED
2.7.2
Back side
DC IN
DC OUT
GPIO
MOTOR
2.8
Serial Communication Settings
Communication parameters are preset in the SMC100CC/PP controller and do not
require any configuration:
Bits per second
Data bits
Parity
Stop bits
Flow control
Terminator
Single-Axis Motion Controller/Driver for DC or Stepper Motor
RJ9F: For SMC-RC remote display and jog keypad.
Sub-D9M: RS-232-C communication port for computer
communication
RJ11F: RS-485 input for chaining several SMC100CC/PP in a
multi-drop configuration
RJ11F: RS-485 output for chaining several SMC100CC/PP in a
multi-drop configuration
4 switches: Dip switches for communication setup
LED: Status LED
Ø 2.1 x Ø 5.5 x 11 mm: Power supply input (connect to
SMC80-PS)
Ø 2.1 x Ø 5.5 x 11 mm: Power supply repeater for connecting
several SMC100CC/PP to the same power supply
Sub-D15F: General purpose inputs/outputs
Sub-D25F: Motor connection
57,600
8
None
1
Xon/Xoff
C
L
R
F
8