Basic Operations For The Menus - Panasonic AW-RP50E Operating Instructions Manual

Basic operations for the menus

1
Set the MENU button to ON.
Press the MENU button and light its indicator.
2
Select the target menu.
Press the corresponding PRESET MEMORY/MENU
button, and light its indicator.
For details on the menus assigned to these buttons,
refer to "Table of menu items" (<Operations and
Settings> Operating Instructions).
The selected menu is displayed on the LCD panel.
3
Change the settings using the F1 dial and F2
dial.
Use the F1 dial and F2 dial to select the menus and
change the settings.
Use the F1 dial for operations involving the items
displayed on the top line of the LCD panel.
Use the F2 dial for operations involving the items
displayed on the bottom line of the LCD panel.
1
For detailed operations, refer to the Operating Instructions — <Operations and Settings>.
POWER ALARM
1 2
MENU PAGE GAIN/PED R/B GAIN
6 7
STORE DELETE DETAIL SCENE/MODE
PRESET MEMORY / MENU
1 2
IRIS AUTO
CAMERA STATUS / SELECTION
AUTO
TELE
ZOOM
WIDE
FOCUS/
  Press the EXIT button to return the menu to its
previous hierarchical level.
  When the down arrow "" is displayed for a setting
item, it means that the value shown will be entered
and the setting reflected when the F1 dial or F2 dial is
pressed.
1 . G R O U P S E L E C T
  When the down arrow "" is not displayed
for a setting item, it means that the value
shown will be entered and the setting
reflected when the F1 dial or F2 dial is turned.
R G A I N
B G A I N
F1
F2
F1
3 4 5
R/B PED AWB/ABB SHUTTER F2
8 9 10
CAMERA SETUP SYSTEM USER1
3 4 5
LOW HI
OTAF PTZ/FOCUS SPEED PAN/TILT
PUSH
2
15 (F)
1
: ± 0 0 0
F1 dial
: ± 0 0 0
F2 dial
CAMERA
3
OSD
EXIT
USER2
PT ACTIVE