Network Settings; Setting The Unit - Panasonic AW-RP50E Operating Instructions Manual

Network settings

This section describes how the unit's network are set.
 Setting the unit 
The unit's settings are established using the [SYSTEM]
menu.
Set the IP address, subnet mask and default gateway.
First, the basic menu operations will be described.
1
Set the MENU button to ON.
Press the MENU button, and light its indicator.
2
Set the PRESET MEMORY/MENU 10 button
(SYSTEM) to ON.
When the button is pressed and its indicator is lit, the
[SYSTEM] menu is displayed on the LCD panel.
[1] C AM ER A C TL
3
Turn the F1 dial, and display the [NETWORK]
menu.
[6] N ET WO R K
4
Press the F1 dial.
1. I P A D D R ES S
19 2 1 6 8 . 0 00 . 0 09
5
Turn the F1 dial, and display the target setting
item.
1. I P A D D R ES S
19 2 1 6 8 . 0 00 . 0 09
2. S U B N E T M AS K
25 5 2 5 5 . 2 55 . 0 00
3. G A T E W A Y
19 2 1 6 8 . 0 00 . 0 01
4 . M A C A D DR E S S
6
7
▼
▼
▼
▲
16 (E)
Turn the F2 dial, and select the setting.
2. S U B N E T M A S K
25 5 2 5 5 . 2 5 5 . 00 0
Press the F2 dial, and change the setting.
2. S U B N E T M A S K
25 5 . 2 5 5 2 5 5 . 00 0
Input all the settings except for the MAC address in four
blocks of numerals.
When input advances to the last block and the F2 dial is
pressed, the IP address is entered.
2 .SU BN ETM AS K
2 55. 25 5.2 55 .00 0
  The MAC address is merely displayed — it cannot be
changed.
Note
In order for the settings to take effect, the unit must
be restarted.
Turn off the unit's power, and then turn it back on
again.