Settings For Connection With The Remote Cameras - Panasonic AW-RP50E Operating Instructions Manual

Connections
 Settings for connection with 
the remote cameras
Either serial connection "Serial" or IP connection "Network"
can be selected for the connections between the unit and
the remote cameras for camera numbers CAM1 to CAM100.
On the [SYSTEM] menu, select [CAMERA CTL], and display
[CAM1] to [CAM100].
Then select the setting for the camera numbers.
Serial: Serial connection
Network: IP connection
NoAsign: No setting assigned (initial setting)
 Serial connection 
Select "Serial" as the setting for the target camera number.
1.C A M1
Camera numbers CAM1 to CAM5 correspond to the TO
PAN/TILT HEAD connectors [1] to [5] on the unit's rear
panel.
  Serial connection "Serial" cannot be selected for camera
numbers CAM6 to CAM100.
▼
S e ri a l
22 (F)
 IP connection 
Select "Network" as the setting for the target camera
number.
2.C AM 2
On the [SYSTEM] menu, select [CAM IP ADR], and display
[IP:CAM1] to [IP:CAM100]. Then use the IP addresses
corresponding to the camera numbers for the connection.
Net wo rk