Basic Operations - Panasonic CZ-RWS3 Quick Reference

Basic Operations

Setting the Current Time
1. Press for 2 seconds or
longer.
• The time display flashes. (The colon
lights up.)
2. Press /
then press
3. Press /
minutes, then press
Note
• If the buttons are not pressed for a
certain duration while setting the time,
the displayed time is set.
• Adjust the time periodically.
Operation
Hold the remote controller with your hand and point its transmitter at the receiver.
Power: Turn on the circuit breaker beforehand, referring to the
operating instructions for the unit.
1. Press .
2. Press to select the
operation mode.
• Every time you press
from "Auto
Cool → Fan
• Models that only provide the cooling
function cannot operate in the auto or
heating mode.
• The available functions differ depending
on the indoor unit being used.
3. Press
• Every time you press
from " →
(Auto)".
• Auto does not work in Fan mode.
• If the unit is not heating very effectively
with a fan speed "
speed to "
• The available functions differ depending on the indoor unit being used.
• " " is displayed if the function is not available.
8
to set the hour,
.
to set the
.
, it cycles
→ Heat → Dry
".
to select the fan speed.
, it cycles
→ → →
", switch the fan
" or " ".
2, 3
→
3
5
→
2, 3
1
1
4
2