Panasonic AW-RP50E Operating Instructions Manual page 86

Network settings
Setting the IP address
On the [SYSTEM] menu, select the [NETWORK] menu, and
display [IP ADDRESS].
Then operate the F2 dial to set the IP address.
Select a setting which will not duplicate the IP setting of
another device.
1 .I P AD D R E S S
1 92 1 68 . 0 0 0 . 0 0 9
If the same IP address is used more than once, the "IP
Duplication!" message is displayed on the LCD panel.
1 . I P A D D RE S S
I P D u p l i ca t i o n !
If the IP address is incorrect, the following message is
displayed on the LCD panel.
U n a v a i l a bl e
n e t w o r k se t t i n g
Notes
  In order for the setting to take effect, the unit must be
restarted.
Turn off the unit's power, and then turn it back on
again.
  Consult the network administrator before setting the
IP address.
Setting the subnet mask
On the [SYSTEM] menu, select the [NETWORK] menu, and
display [SUBNETMASK].
Then operate the F2 dial to set the subnet mask.
2 .S U B NE T M A S K
2 55 2 55 . 2 5 5 . 0 0 0
If the subnet mask is incorrect, the following message is
displayed on the LCD panel.
U n a v a i l a bl e
n e t w o r k se t t i n g
Note
In order for the setting to take effect, the unit must be
restarted.
Turn off the unit's power, and then turn it back on again.
On the [SYSTEM] menu, select the [NETWORK] menu, and
display [GATEWAY].
Then operate the F2 dial to set the gateway.
▼
If the default gateway is incorrect, the following message is
displayed on the LCD panel.
▼
Set the port number for the remote camera.
On the [SYSTEM] menu, select [CAM PORT] and display
[PORT:CAM1] to [PORT:CAM100], and then operate the F2
dial to set the port number.
On the [SYSTEM] menu, select the [NETWORK] menu, and
display [MAC ADDRESS].
17 (F)
Setting the default gateway
3 . G A TE W A Y
1 9 2 16 8 . 0 0 0 . 0 0 1
U n a v ai l a b l e
n e t w or k s e t t i n g
Note
In order for the setting to take effect, the unit must be
restarted.
Turn off the unit's power, and then turn it back on again.
Setting the port number
1 . P O R T : C A M1
Setting the MAC address
4 .M AC AD DR ES S
▼
8 0
▲