Parts And Their Functions; Control Panel - Panasonic AW-RP50E Operating Instructions Manual

Parts and their functions

 Control panel 
 POWER indicator [POWER]
This indicator lights when the POWER switch () on the
rear panel is set to ON while power is supplied to the DC
IN socket.
 ALARM indicator [ALARM]
This indicator lights when there is a problem with the
power supply (voltage drop).
It also lights when an alarm (a cooling fan alarm or pan/
tilt error) has been received from a remote camera.
 Refer to "Checking the equipment alarm information"
(<Operations and Settings> Operating Instructions).
When the alarm indicator has lit, stop using the unit
immediately, and be absolutely sure to contact your
dealer.
Continuing to use the unit even after an alarm has
occurred may cause the unit to malfunction.
The alarm information can be output to an external
device from the unit's TALLY/GPI connector ().
 LCD panel
The current setting statuses are displayed on this panel.
POWER ALARM
1 2
MENU PAGE GAIN/PED R/B GAIN
6 7
STORE DELETE DETAIL SCENE/MODE
PRESET MEMORY / MENU
1 2
IRIS AUTO
CAMERA STATUS / SELECTION
AUTO
TELE
ZOOM
WIDE
FOCUS/
F1
F2
F1
3 4 5
R/B PED AWB/ABB SHUTTER F2
8 9 10
CAMERA SETUP SYSTEM USER1
3 4 5
LOW HI
OTAF PTZ/FOCUS SPEED PAN/TILT
PUSH
 F1 dial, F2 dial [F1, F2]
These dials are turned to change the menu values, and
they are pressed to enter the changes that have been
made.
The F1 dial is used to operate the items displayed at the
top of the LCD panel, and the F2 dial is used to operate
the items displayed underneath.
What appears on the on-screen displays of the remote
cameras and how operations are performed differ
depending on the camera type.
 Refer to "Operating the menu items of the selected
remote camera" (<Operations and Settings> Operating
Instructions).
10 (S)
CAMERA
OSD
EXIT
USER2
PT ACTIVE