Installation Precautions - Panasonic AW-RP50E Operating Instructions Manual

Installation precautions

 In addition to heeding the points presented in the "Consignes de sécurité", observe the 
following precautions as well.
Be absolutely sure to ask your dealer to do the jobs of installing and connecting the unit.
Connecting the power supply
  Use within AC 100 V to 240 V.
  Be absolutely sure to use only the power cable and AC
adapter supplied with the unit.
  The power cable supplied with the unit has a 3-pin plug
with a grounding terminal.
Connect it to a 3-pole outlet which has been connected to
ground.
  Be absolutely sure to connect the ground terminal
(SIGNAL GND) at the rear of the unit to the system
ground.
  Pour éviter que la fiche CC ne se débranche, fixer le
câble de l'adaptateur secteur à l'aide du serre-câble.
  When the unit is not going to be used for a prolonged
period of time, turn off its power, and disconnect the
power plug from the AC outlet.
POWE R
ON
12 V
LA N
B O O T
1
M
S V N
Serre-câble
Handle carefully!
  Dropping the unit or subjecting it to strong impact or
vibration may cause trouble and/or malfunctioning.
Do not allow any foreign objects to enter inside
the unit!
  Allowing water, metal items, scraps of food or other
foreign objects inside the unit may cause a fire and/or
electric shocks.
Choosing the best installation location
  This unit is designed for indoor use only.
  Install the unit on a sufficiently strong, stable and level
surface for use.
  Ensure a space of at least 100 mm around the front vents
to avoid obstructing ventilation.
In particular, ensure sufficient space between ventilation
and wiring when using mounted in a panel or table.
  Do not install the unit in a manner in which its cables and
other accessories can be easily damaged.
  Do not install the unit in a cold place where the
temperatures will drop below 0 °C or in a hot place where
the temperatures will rise above +40 °C.
  Avoid installing the unit where it will be exposed to direct
sunlight or to the hot air that is blown out from other
products.
  Installing the unit in a very humid, dusty or vibration-
prone location may give rise to trouble.
Ventilation holes
8 (F)