Panasonic AW-RP50E Operating Instructions Manual page 176

Характеристики
Compact design
  The unit features a compact design with its half-rack
size width (210 mm [8-1/4˝]) and its 4RU size (177 mm
[6-15/16˝]) depth.
The unit is the same size as the AW-HS50 compact
live switcher (option), and when the switcher is placed
alongside the unit, the two units are housed in the full
rack width.
IP connection and serial connection supported
IP connection
  Up to 100 remote cameras
a network hub (switching hub).
  Using the unit's automatic IP setting function, the IP
addresses of the remote cameras
be assigned and controlled automatically.
1: Camera supported: AW-HE50
2: Switcher supported: AW-HS50
  Up to five units can be connected to the same network to
control the remote cameras simultaneously.
  Using the Setup Software provided by the camera
controller, it is possible to set the IP addresses of the
remote cameras and switchers from a PC via the camera
controller.
Serial connection
  Up to five remote cameras or pan-tilt head systems can
be controlled.
Easy to operate the cameras
  The pan, tilt, zoom, focus and iris operations of the
cameras can be easily performed from the unit.
  The gain, shutter, detail, white balance and black balance
adjustments can be performed on the unit's LCD menu.
(The adjustment items and range differ depending on the
cameras connected.)
Easy to operate the preset memory data of the pan-tilt
heads
  Up to 100 sets of preset memory data of the pan-tilt
heads can be registered and then recalled later.
(1)
can be controlled through
(1) (2)
and switcher can
Function for linkup with the switcher using IP
connection
  By linking the unit with one AW-HS50 compact live
switcher using an IP connection to make the connection
between them, a highly efficient operating environment is
achieved.
Camera information display
  The camera setting information (such as the lens iris
and gain setting) imported by the unit can be shown on
the AUX image output from the switcher or on the split-
screen display multi view display.
Tally information imported
  The switcher's ON AIR tally information is imported,
and the tally indicators (above the CAMERA STATUS/
SELECTION buttons) on the panel are lit.
Bus material selection
  The switcher's bus materials can be selected from the
unit.
By pressing the CAMERA STATUS/SELECTION button,
these materials can be switched.
Control buses supported: AUX, PVW, PinP, KEY-F
Using a single-step action to operate one of these
buttons, the switcher's multi view screen can be switched
to a full-screen display on which to show the camera
images. (Focus assist function)
Control buses supported: AUX
Parameter changes
  Using the unit's PAN/TILT lever or ZOOM button, the PinP
position and other parameters of the switcher can be
changed.
5 (R)