Panasonic AW-RP50E Operating Instructions Manual page 114

Parts and their functions
 CAMERA OSD button [CAMERA OSD]
When the CAMERA OSD button is held down, its
indicator lights, and the on-screen menu of the selected
remote camera is displayed as the output image of the
remote camera.
When the button is held down again while its indicator is
lit, the menu is cleared, and the indicator goes off.
 EXIT button [EXIT]
Press this during menu operations to return to the
previous hierarchical level.
 USER buttons [USER1, USER2]
The functions of some of the setting items on the menus
can be assigned to [USER1] and [USER2] to be recalled
later.
 Refer to "Setting the USER buttons" (<Operations and
Settings> Operating Instructions).
 MENU button [MENU]
Press this to recall the menus using the PRESET
MEMORY/MENU buttons ().
When it is pressed again while its indicator is lit, the
menu is cleared, and the indicator goes off.
Button indicator ON:
The menu operations take effect.
Button indicator OFF:
The menu operations have no effect.
 Refer to "Basic operations for the menus".
 PAGE button [PAGE]
Press this to specify the preset memory of the remote
camera.
When the button is pressed, its indicator lights, and the
mode for selecting the page of the preset memory is
established.
In this mode, press one of the PRESET MEMORY/MENU
buttons (), and specify the page number.
Next, specify the number on the page using one of the
PRESET MEMORY/MENU buttons.
 Refer to "Setting and operating the preset memories"
(<Operations and Settings> Operating Instructions).
 STORE button [STORE]
Press this to register the preset memory data of the
currently selected remote camera.
When it is pressed again while its indicator is lit, the
menu is cleared, and the indicator goes off.
Button indicator ON:
The preset memory data registration mode is
established.
Button indicator OFF:
The preset memory data registration mode is
released.
 Refer to "Setting and operating the preset memories"
(<Operations and Settings> Operating Instructions).
 DELETE button [DELETE]
Press this to delete the preset memory data for the
currently selected remote camera.
When it is pressed again while its indicator is lit, the
menu is cleared, and the indicator goes off.
Button indicator ON:
The preset memory data deletion mode is
established.
Button indicator OFF:
The preset memory data deletion mode is released.
 Refer to "Setting and operating the preset memories"
(<Operations and Settings> Operating Instructions).
 PRESET MEMORY/MENU buttons
[PRESET MEMORY/MENU]
Use these buttons to recall the preset memory data and
recall menus.
 CAMERA STATUS/SELECTION buttons
[CAMERA STATUS/SELECTION]
Use these buttons to select up to five remote cameras.
Button indicator ON:
The corresponding remote camera is selected.
Button indicator OFF:
The selection of the corresponding remote camera
is released.
Using the menu, up to 100 remote cameras can be
divided into 1 to 20 groups, and then registered and
controlled. The statuses of the remote cameras assigned
to buttons 1 to 5 can be identified using the indicators
positioned above the buttons.
 Refer to "Selecting the remote cameras to be
operated".
 ZOOM button [ZOOM]
Use this to adjust the lens zoom.
When the TELE end is pressed:
Telephoto setting
When the WIDE end is pressed:
Wide-angle setting
The zooming speed changes depending on the extent to
which the button is pressed.
11 ( I )