Basic Operations - Panasonic CZ-RTC5A Operating Instructions Manual

Basic Operations

1
Start operation.
Press
(The operation indicator illuminates.)
 To change the setting
(P.10)
 To turn the energy saving
operation ON/OFF
Press during operation.
(Only for models equipped with the
energy saving function.)
 To stop
(The operation indicator turns off .)
2
Select the item to set.
Press ◄
3
Change the setting.
Press ▲▼ →
Note
 Operation modes that cannot be set are not displayed.
 The swing and airfl ow direction on the remote control is not synchronised with the fl ap movement.
 The fl ap display diff ers from the actual fl ap angle.
 Pressing
the contents before mains power failure has occurred.
 If no operation is performed for a certain period of time, the backlight turns off to
save electricity. (Press any button for illumination.)
 The energy saving operation restricts the maximum current value, resulting in
decreased cooling/heating performance.
(If the current of outdoor units does not reach the peak due to low load operation,
the current value is not restricted.)
 For models that cannot change the airfl ow direction, the airfl ow direction is not displayed.
 When restricting the set temperature range (P.31)
 The fan speed and airfl ow direction in cooling/drying operation can be adjusted with 3
levels if controlling using one remote controller while assigning an indoor unit (e.g. ceiling-
hung type) which has a 3-level adjustment of fan speed and airfl ow direction in cooling /
drying operation as main unit, and assigning a 4-way ceiling cassette type as sub unit.
8
(EN)
.
►.
.
(The cursor disappears.)
after recovery from mains power failure will resume operation with
Operation indicator
Energy saving operation
is in process.