Basic Operations - Panasonic CZ-RTC6 Operating Instructions Manual

Basic operations

1
Start operation.
Press
• Pressing
power failure will resume operation with
the contents before mains power failure
has occurred.
• It is possible to set the screen in Step 2
as the top screen when starting operation.
(P.19 "Display mode")
In that case, skip Step 2 below.
„ To stop operation
Press
2
Check the current operating status.
Press
• When no operation is performed for
several seconds, the display returns to the
top screen.
3
Select the item to set.
Press
(Repeat)
• When no operation is performed for
several seconds, the display returns to the
top screen.
• "SET TEMP." (Set temperature) is not
displayed in Fan mode (
Note
z For models that cannot change the airflow direction, "FLAP" is not displayed.
6
(EN)
.
after recovery from mains
.
.
.
).
Operation
mode
Set
temperature
Fan speed
Flap
Top screen
SET TEMP.
MODE
FAN SPEED
FLAP
Menu