Basic Operations Of The Unit - Panasonic AW-RP50E Operating Instructions Manual

Basic operations of the unit

1
Turn on the unit's power.
Set the POWER switch to the ON position.
Power is now supplied to the unit, and the POWER
indicator lights.
  However, when [CAMERA]  [POWER] 
AUTO ON item have been selected and "On" is
selected as the AUTO ON item setting, power-on
is automatically instructed for the remote cameras
controlled by the [SYSTEM]  CAM IP ADR item.
2
Select the remote cameras.
Select the remote cameras to be controlled using the
CAMERA STATUS/SELECTION buttons.
3
Adjust the direction in which the remote
cameras are to be pointed.
Use the PAN/TILT lever to adjust the direction in which
the remote cameras are to be pointed.
4
Adjust the zoom.
Use the ZOOM button to adjust the lens zoom.
When the TELE side is pressed, the zoom is set to the
telephoto mode; when the WIDE side is pressed, it is
set to the wide-angle mode.
1, 7
5
4
For detailed operations, refer to the Operating Instructions — <Operations and Settings>.
POWER ALARM
1 2
MENU PAGE GAIN/PED R/B GAIN
6 7
STORE DELETE DETAIL SCENE/MODE
PRESET MEMORY / MENU
1 2
IRIS AUTO
CAMERA STATUS / SELECTION
AUTO
TELE
ZOOM
WIDE
FOCUS/
6
5
Adjust the lens iris.
Use the IRIS dial to adjust the lens iris.
  While the lens iris is being adjusted, a level meter is
displayed on the LCD panel. (What is displayed by
the level meter is an approximate value.)
-- --- - --- -- -
6
Adjust the focus.
Turn the FOCUS/PUSH OTAF dial, and adjust the lens
focus.
When the dial is pressed during manual focusing, the
auto focus mode is established temporarily, and the
subject is brought into focus automatically.
  The OTAF (one-touch auto focus) takes effect for
remote cameras which are equipped with the OTAF
function.
7
Turn off the unit's power.
Set the POWER switch to the OFF position.
The unit's power is turned off, and the POWER indicator
goes off.
  Even when the unit's power is turned off, the power
of the connected remote cameras does not go off.
F1
F2
F1
3 4 5
R/B PED AWB/ABB SHUTTER F2
8 9 10
CAMERA SETUP SYSTEM USER1
3 4 5
LOW HI
OTAF PTZ/FOCUS SPEED PAN/TILT
PUSH
2
14 ( I )
CAMERA
OSD
EXIT
USER2
PT ACTIVE
3