Specifications - Panasonic AK-HCU3550EA Operating Instructions Manual

Camera control unit
Table of Contents

Advertisement

12. Specifications

AC input voltage:
DC input voltage:
Power consumption:
Power supply capacity: AC 220 V (±5 %), 1.2 A, 50/60 Hz
indicates safety information.
Operating temperature: 0 °C to +40 °C
Humidity:
10 % to 90 % (no condensation)
Dimensions (W M H M D): 200 M 120 M 445 mm, excluding protrusions
9 kg
Mass (weight):
HD-SDI/SD-SDI M4 lines
Video output:
Analogue composite M2 lines (shared by picture monitor output 1 line
Analogue composite M1 line
WFM output:
HD-SDI/SD-SDI M4 lines
Return input:
Analogue composite M2 lines
Prompter input:
Black burst/tri-level M2 lines (loop-through M1 line)
Reference input:
Analogue sync, HD (±0.3 V [p-p])/SD (1 V [p-p]) (with 75 j termination) M1 line
Sync output:
0 dBm/600 j M2 lines
Mic output:
Intercom input/output (0 dBm, 600 j, 2W/RTS/4W
Communication:
PGM input (0 dBm/600 j) M2 lines
Tally input (Red, Green) M1 line each
WFM CONT:
For WFM control (open collector output)
AUX:
For setting down-conversion system (photo-coupler input)
For tally, alarm (open collector output)
RS-422/RS-232C M2 lines
TRUNK:
RS-422 M1 line, 12 V output
ROP I/F:
RS-422 M1 line, GPI for control
MSU I/F:
For use with PC connections M1 line (10Base-T/100Base-TX, crossover cable)
LAN:
K1: Embedded audio is supported only for HD signal output.
K2: Prompter input 2 and reference input 2 share the same connector so only one of these inputs can be selected
at one time.
K3: The black burst signal and tri-level sync signal of reference input 1 are recognized automatically.
K4: Depending on the setting, only one of these outputs can be selected at one time.
Note
For details on the maximum lengths of the connecting cables, consult your dealer.
Mass (weight) and dimensions indicated above are approximate.
Specifications are subject to change without notice.
220 V - 240 V, 50/60 Hz
Use an AC supply voltage in the range of 220 V to 240 V.
12 V
37 W (excluding power supply),
340 W (include power supply),
K1
(shared by picture monitor output 1 line
K2
K4
K2, K3
K4
) M2 lines (ENG/PROD)
75
K4
)
K4
)
K4

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents