Maintenance; Cam Power: Camera Power Setting; Vf Power: Viewfinder Power Setting - Panasonic AK-HCU3550EA Operating Instructions Manual

8. Setting of menu items

Maintenance

This is the Maintenance menu selection screen.
When the cursor is brought to the "Maintenance" menu title
and the jog dial is pressed, the display returns to the TOP
MENU screen.
>> Maintenance >>
Start Up
Mode
Analog Gain
ND/CC Name
Date/Time
Network
Version
PM View Setting
PM Operation STAT
System
p Start Up
Select this to display the Start Up setting screen.
p Mode
Select this to display the Mode setting screen.
p Analog Gain
Select this to display the Analog Gain setting screen.
p ND/CC Name
Select this to display the ND/CC Name setting screen.
p Date/Time
Select this to display the Date/Time setting screen.
p Network
Select this to display the Network setting screen.
p Version
Select this to display the Version information screen.
p PM View Setting
Select this to display the screen on which to set ON or
OFF for the items (iris, status displays) to be displayed on
the picture monitor.
p PM Operation STAT
Select this to display the screen on which to set ON or
OFF for the operation items to be displayed on the picture
monitor.
p System
Select this to display the screen on which to initialize the
menu settings.
Be sure to ask your dealer to carry out the operations described in
this chapter for you.
Start Up
This menu contains the settings for exercising control when
the unit's power is turned on.
When the cursor is brought to the "Start Up" menu title
and the jog dial is pressed, the display returns to the
Maintenance menu at the next hierarchical level above.
> START UP >
CAM Power
VF Power
p CAM Power: Camera power setting
Select this to set the control over the camera's power that
is to be exercised when the unit's power has been turned
on.
When OFF is selected, the camera's power will not come
on even when the unit's power has been turned on. If
this is the case, HeadPower must be set to ON on the
operation panel of the ROP or MSU.
When ON is selected, the camera's power will come on
when the unit's power has been turned on.
When REMOTE is selected, the camera's power is turned
on or off depending on the setting established for the
camera's power when the unit's power was last turned off.
Selection options: OFF, ON, REMOTE
p VF Power: Viewfinder power setting
Select this to set the control over the viewfinder's power
that is to be exercised when the unit's power has been
turned on.
When OFF is selected, the viewfinder's power will not
come on even when the unit's power has been turned on.
If this is the case, VF Power must be set to ON on the
operation panel of the ROP or MSU.
When ON is selected, the viewfinder's power will come on
when the unit's power has been turned on.
When REMOTE is selected, the viewfinder's power is
turned on or off depending on the setting established for
the viewfinder's power when the unit's power was last
turned off.
Selection options: OFF, ON, REMOTE
59
ON
ON