Panasonic AK-HCU3550EA Operating Instructions Manual page 55

8. Setting of menu items
HD Phase
This menu is used for the HD signal phase adjustments.
When the cursor is brought to the "HD Phase" menu title and
the jog dial is pressed, the display returns to the Operation
menu at the next hierarchical level above.
> HD Phase >
HD H Coarse
HD H Fine
HD-SD H Phase
p HD H Coarse:
Horizontal sync phase coarse adjustment
Select this to coarsely adjust the horizontal sync phase to
the HDTV genlock sync signals.
Selection options: –60 to 60
p HD H Fine:
Horizontal sync phase fine adjustment
Select this to finely adjust the horizontal sync phase to
the HDTV genlock sync signals.
Selection options: –100 to 100
p HD-SD H Phase:
Horizontal phase adjustment between HD/SD
Select this to adjust the horizontal phase of the SDTV
output to that of the HD genlock sync signals.
Selection options: 0 to 1319
Be sure to ask your dealer to carry out the operations described in
this chapter for you.
0
0
1000
55
SD Phase
This menu is used for the SD signal phase adjustments.
When the cursor is brought to the "SD Phase" menu title and
the jog dial is pressed, the display returns to the Operation
menu at the next hierarchical level above.
> SD Phase >
SD H Coarse
SD H Fine
SC Coarse
SC Fine
SD-HD H Phase
SD-HD V
p SD H Coarse:
Horizontal sync phase coarse adjustment
Select this to coarsely adjust the horizontal sync phase to
that of the SDTV genlock sync signals.
Selection options: –15 to 15
p SD H Fine:
Horizontal sync phase fine adjustment
Select this to finely adjust the horizontal sync phase to
that of the SDTV genlock sync signals.
Selection options: –100 to 100
p SC Coarse:
Subcarrier phase coarse adjustment
Select this to coarsely adjust the subcarrier signal phase
to that of the SDTV genlock sync signals.
Selection options: 0 to 7
p SC Fine:
Subcarrier phase fine adjustment
Select this to finely adjust the subcarrier signal phase to
that of the SDTV genlock sync signals.
Selection options: –50 to 50
p SD-HD H Phase:
Horizontal phase adjustment between SD/HD
Select this to adjust the horizontal phase of the HDTV
output to that of the SDTV output.
Selection options: 0 to 1727
p SD-HD V:
Vertical phase setting between SD/HD
Select this to set the vertical phase of the HDTV output to
that of the SDTV output.
When ADVANCE is selected, the HD signals are
advanced by 90H with 60 Hz or by 75H with 50 Hz for the
HTDV signals over the SDTV genlock sync signals.
When 0H_SD_DLAY is selected, the SDTV signals are
delayed and set in-phase with the HDTV signals.
Selection options: 0H, ADVANCE, 0H_SD_DLAY
0
0
0
0
1170
0H